User`s manual

5) Unlock Group: The definition is the definition of combination lock that can unlock different

combinations, each combination composed by different groups.

6) Lock delay: Seconds of lock open when user confirmed

7) DoorSensorSet: Setup door sensor to activate alarm when door is not closed

8) Alarm Time: Setup the duration of alarm in minutes.

9) Turn off alarm: turn the alarm off, if illegal log in reaches 5.

4.4.2 Access Control Function

Each user setup is a combination of group identification, group time period and user time period.

Grouping is dispatch user to certain group. Group Time period could select up to three (3) preset

time periods. User Time period could also select up to three preset time period as well.

 The employee can be enrolled in different group combination.

 The open door access time should be in any valid time from the setting.

 Every new enrolled user will be in the first group. If the user changed the setting, the

system will apply the new setting itself.

4.4.3 Time Period Definition

A-1300 can store up to 50 Time Zone. Each Time Zone can store up to 7 different time periods

(one week). Each user can apply up to 3 Time Zones.

Note: System default time period setting will allow new user to access the door for entire day.

1) Select 1. Define Time Zone. The screen is displayed as following:

Press [OK] to access Time Zone # settings, the screen will display as following: