User`s manual

4.2 Log Options

Select Log Opt, the following message appears:

SLog Warning: Warning alarm when number of management log capacity is low.

GLog Warnging: Warning alarm when number of user log capacity is low

Re-Verify: Set a specific time range in minutes to prevent double punch of the same user within a

short period of time. The second punch will be ignored if double punch happens within a specified

number of minutes.

4.3 Communication Options

Select Communication Option, the following message appears:

 Device ID: Terminal unique ID (range: 1 to 255).

 Baud Rate: Choose from 9600, 38400, or 115200.

 Port #: TCP communication port, the default setting is 5005.

 IP address: Enter the IP address according to your networking options. The default IP

address is 192.168.1.204.



Subnet Mask: Networking connection with the terminal setup.

 Default Gateway:

Networking connection with the terminal setup.

 Server IP: Enter the IP address according to your networking options. The default IP

address is 192.168.1.200.

 Server Port:

Networking connection with the terminal setup.