User`s manual

3.0 Enrollment and Verification Procedures

This chapter describes user enrollment and verification processes.

The following topics are included:

 Enrolling User

 Testing an Enrollment

 Enrolling a User with the Display Finger Option On

 Verifying Your Identity



Hints for Successful Enrollments

Note: You must have Manager or Supervisor user first to be able to

enroll users. For information on status levels, see “Authority (Status)

Levels” on

2.1.5”

3.1 Enrolling User

If this is the first enrollment in the new system, everyone is allowed to enroll himself/herself in to

the system. However if there is an enroller or above authority level enrolled in the system, you will

need an enroller or above authority level to confirm for a new enrollment by verifying the enroller

or above authority level personnel’s fingerprint before new user enrollment.

There are many verification method options for a new user enrollment: fingerprint, proximity card,

password, or any combination of the above three. Fingerprint enrollment ideal for most of the

people who have better quality fingerprints. Any combination of the three (3) verification method

options is for few people with poor quality of fingerprints.

To start the enrollment process, press [Menu], the enroller or above authority level personnel

presses fingerprint to verify identity in order to go into menu options. If there is no manager in the

terminal, the following message appears on the display:

Press [OK] to enter User Manage, the following message is displayed: