User's Manual

25
Talk Group Programming
Talk groups are where most of the settings for the system will be made. Talk groups are a method of
presenting the powerful options of the system to the user in a straight-forward and intuitive way. Each
Headset Station or Wireless Belt Station is capable of (4) Selections as well as a PTT button. Talk
groups are configured such that different combinations of selection and PTT pressed/not pressed can
have different settings.
Headset Stations have four buttons labeled 1-4 to choose the selection and a PTT button to assert PTT.
Wireless Belt Stations cycle through selections in numerical order by momentarily pressing the power
button. A voice prompt will indicate “one”, “two”, “three”, or “four”. PTT is asserted by the large button on
the front of the Wireless Belt Station or by the PTT button on the mic boom.
Tip: A device shown with red text and a green outline is a device that has one or more channels
configured as part of the current talk group.
Following are some examples of common scenarios and how to program the system for each of them.