User's Manual

Figure 8.8

7. On the Auto-Configure page, select all the devices that you want to use on this system. Note that

if you are connected to a LAN, there may be devices on the network that you do not wish to

configure. In most cases however, you should check “Select All”.

8. Once you have selected the devices, click “Auto Configure Now”. A warning will appear notifying

you that settings will be cleared from the Master Station, the devices you have selected and any

devices previously configured by this Master Station. Click OK and the Auto-Configure operation

begins. Depending on how many devices there are to configure, this could take several minutes.

9. See Figure 8.9.