User's Manual

H E A D S E T A C C E S S O R I E S C U S T O M E R S E R V I C E
10 WWW.DAVIDCLARK.COM
WWW.DAVIDCLARK.COM 11
Replacable Parts Removal/Installation
M-55 Microphone (P/N 09168P-66)
• To remove microphone: Gently pull off foam cover. Grasp
microphone firmly and pull straight out.
• To install microphone: Align keyway on microphone with
keyway on boom. “TALK” should be inward towards the user’s
face. Push until microphone snaps into place.
Microphone Foam Cover (P/N 40062G-05)
• Slide foam cover over top of microphone and secure with
‘O’ ring (included).
Leatherette Ear Seals, Pair (P/N 15976P-03)
• To remove: Gently pull off.
• To install : Stretch earseal over lip of dome until completely
seated on dome.
Leatherette, Vented Head Pad (P/N 15977P-02)
• To remove: Gently pull off.
• To install : Align head pad with headband assembly and push
all around the perimeter to engage hook-and-loop fasteners.
David Clark Company aviation headsets are covered by a 5-year
warranty. We make every effort to prevent problems and the need for
repairs. In the unlikely event that you experience a problem, David
Clark Company qualified representatives are available to answer your
questions and provide the best customer service in the industry.
Many repairs are covered under warranty. Contact Customer Service:
Tel. [phone]
508-751-5800 (outside the USA)
Visit our website at www.davidclark.com
Customer Service and Support
DCPRO MANUAL 5-10.indd 10-11 5/22/13 10:29 AM