User's Manual

Bluetooth Device ID: David Clark Headset (V100)
O V E R V I E W & O P E R A T I O N O V E R V I E W & O P E R A T I O N
6 WWW.DAVIDCLARK.COM
WWW.DAVIDCLARK.COM 7
The David Clark H-BT headset is a wireless audio/communication
device that uses Bluetooth 4.0 to connect to smartphones,
computers or other Bluetooth-equipped devices. The headset is
equipped with a rechargeable lithium ion battery capable of up to
30 hours of continuous music streaming/talk time. Standby time
is estimated at up to140 hours.
Operation
Button Action
Inner button long held (>=1sec) Device On
Inner button long held (>=2.5sec) Device Off
Inner button short press Enter pairing mode
Outer button short press
Answer incoming call
Hang up outgoing call or active call
Play/Pause
Outer button long held (>=1sec)
Connect last HFP device
Dial last number
Reject incoming call
Transfer call
Outer button double press Voice dial
Note: Volume is controlled solely by selected device.
Status Indications
Inner
Button
Blue/Red
LED
LED Color Headset State
Blue LED on : 2 sec, off : 1 sec,
repeat
All profiles are standby but not yet
connected with Bluetooth device
Blue LED flash every 2 sec
A2DP or HFP is connected
Blue LED flash twice every 2 sec
On A2DP streaming state
Blue LED on : 1 sec, off : 1 sec,
repeat
On active call state
Blue LED and Red LED flash
alternative repeat
Enter pairing mode
Outer button double press Voice dial
Note: Blue LED would be replaced with Red LED when low battery. When
battery charging is complete the Red LED turns off. Recharge time is
approximately 6-7 hours from a low battery.
230-31600 Aurora User Manual 5-8.indd 6-7 5/11/15 8:00 PM