Specifications

87 of 104
The driver's side front inside warning light to be blue
The passenger's side front inside warning light to be blue
The passenger's side front outside warning light to be red
All four (4) lights shall include a clear lens.
All four (4) lights shall be controlled by a lighted switch in the cab on the switch panel.
The inside lights may be load managed if colored or disabled if white, when the parking brake is set.
FRONT WARNING LIGHT Bidder Complies: Yes ( ) No ( )
One (1) Whelen 4500 series FFX4520, 20.00" LED lightbar shall be provided on the front of the cab,
centered beneath the cab windshield, on the lift up service hood.
This lightbar shall include the following:
Two (2) red 400 LINEAR12 LED modules facing forward, one (1) each side.
One (1) white 400 LINEAR12 LED module facing forward, in the center.
Two (2) red LINZ6 LED angled corner warning light, one (1) on each end
These lights shall be activated with the front warning switch.
The flash pattern shall be controlled by two (2) external Whelen ULF28 solid state flashers. The driver
side and the passenger side red forward facing LED shall alternate with the driver side and passenger
side red corner LED and the white center LED.
The lens colors shall be all clear.
To meet the NFPA requirements the colored warning lights may be load managed and the white lights
shall be disabled when the parking brake is applied.
SIDE ZONE LOWER LIGHTING Bidder Complies: Yes ( ) No ( )
Four (4) Whelen Model M6*C LED flashing warning lights with bezels shall be located in the following
positions:
Two (2) lights, one (1) each side on the bumper extension
The side front lights to be red.
Two (2) lights, Top of wheel wheel well.
The side rear lights to be red.
All four (4) lights shall include a clear lens.
All four (4) lights shall be controlled by a lighted switch on the cab switch panel.
SIDE WARNING LIGHTS Bidder Complies: Yes ( ) No ( )
There shall be four (4) Whelen, Model M9*C LED flashing warning light(s) with bezel(s) provided Add a
Whelen M9 warning light on each side of the housing for the light tower, and upper front corners of the
body, clear lens and red LEDs..
The color of the lights shall be red.
All of these lights shall include a clear lens.
These lights shall be activated with the Side Zone Lower warning lights.