Specifications

60 of 104
COMPARTMENT LIGHTING Bidder Complies: Yes ( ) No ( )
There shall be nine (9) compartments with Amdor LED compartment light strips. The strips shall be
centered vertically along each side of the door framing. The compartments with these strip lights shall
be located all body compartments and the roll up speedlay compartments.
Any remaining compartments shall include 6.00" diameter Truck-Lite, Model: 79384, lights in each
enclosed compartment. Each light shall have a number 1076 one filament, two wire bulb.
Opening the compartment door shall automatically turn the compartment lighting on.
HATCH COMPARTMENTS Bidder Complies: Yes ( ) No ( )
Hatch compartments with two (2) lift-up, top opening hatch doors shall be provided above the driver
and passenger side body compartments. Each hatch compartment shall extend the full length of the
side body compartmentation x 21.00" wide x 22.00" maximum depth. The compartments shall extend
the full length of the side body compartmentation except for a 20.00" recessed step area at the rear of
the compartment on the access ladder side.
Sides of the compartments shall be constructed of the same material as the body and painted job color
on the outside panels.
Top of the compartments shall be constructed of bright aluminum treadplate.
Two (2) lift-up, bright aluminum treadplate doors shall be provided on the top of each hatch
compartment. Each door shall have a lever handle with a slam style latch to hold the doors in the
closed position.
These double pan doors shall have lipped edges with a rubber seal for weather resistance.
Doors shall be hinged on the outboard side and shall be held open with pneumatic stay arms.
The compartments shall have a 3/4" drain that extends to below the body.
Ribbed rubber matting shall be provided on the compartment floor to stop wet equipment from sitting
in water pools.
HATCH COMPARTMENT LIGHTING Bidder Complies: Yes ( ) No ( )
There shall be Amdor LumaBar, Model AY-9200-0** LED strip lights mounted full length on the interior,
hinged side of each compartment.
Opening the hatch compartment door shall automatically turn this hatch compartment lighting on.
One (1) divider shall be furnished in the cargo area forward of the hosebed.
The dividers shall be located in cargo area.
MOUNTING TRACKS Bidder Complies: Yes ( ) No ( )
There shall be recessed tracks installed vertically to support the adjustable shelf(s).
Tracks shall not protrude into any compartment in order to provide the greatest compartment space
and widest shelves possible.
The tracks shall be provided in each compartment except for the one that contains the pump operator's
panel.
ADJUSTABLE SHELVES Bidder Complies: Yes ( ) No ( )
There shall be six (6) shelves, with a capacity of 500 pounds provided. The shelf construction shall
consist of .188" thick brushed aluminum with 2.00" sides. Each shelf shall be infinitely adjustable by
means of a threaded fastener, which slides in a track.
The shelves shall be held in place by .12" thick stamped plated brackets and bolts.