Specifications

58 of 104
COMPARTMENTATION, PASSENGER'S SIDE Bidder Complies: Yes ( ) No ( )
A full height, jump off compartment with a roll-up door ahead of the rear wheels shall be provided, as
convenient large storage compartment for often used items for the crew. The interior dimensions of
this compartment shall be 62.00" wide x 54.50" high x 25.88" deep. The area behind the roll up door
spool shall be notched for exterior storage or larger capacity water tank tee. The depth of the
compartment shall be calculated with the compartment door closed. The compartment interior shall be
fully open from the compartment ceiling to the compartment floor and designed so that no permanent
dividers are required between the upper and lower sections. The clear door opening of this
compartment shall be 59.00" wide x 54.50 high.
Closing of the door shall not require releasing, unlocking, or unlatching any mechanism and shall easily
be accomplished with one hand.
A roll-up door compartment over the rear wheels shall be provided. The interior dimensions of this
compartment shall be 60.00" wide x 23.00" high x 25.88" deep. The area behind the roll up door spool
shall be notched for exterior storage or larger capacity water tank tee. The depth of the compartment
shall be calculated with the compartment door closed. The clear door opening of this compartment
shall be 57.00" wide x 23.00" high.
Closing of the door shall not require releasing, unlocking, or unlatching any mechanism and shall easily
be accomplished with one hand.
A full height, roll-up door compartment behind the rear wheels shall be provided. The interior
dimensions of this compartment shall be 52.00" wide x 54.50" high x 25.88" deep. The area behind
the roll up door spool shall be notched for exterior storage or larger capacity water tank tee. The
depth of the compartment shall be calculated with the compartment door closed. The compartment
interior shall be fully open from the compartment ceiling to the compartment floor and designed so
that no permanent dividers are required between the upper and lower sections. The clear door
opening of this compartment shall be 49.00" wide x 54.50" high.
Closing of the door shall not require releasing, unlocking, or unlatching any mechanism and shall easily
be accomplished with one hand.
All compartments shall include a drip pan below the roll of the door.
ROLL-UP DOOR, SIDE COMPARTMENTS Bidder Complies: Yes ( ) No ( )
There shall be six (6) compartment doors installed on the side compartments. The doors shall
be double faced aluminum construction, painted one (1) color to match the lower portion of the body
and manufactured by A&A Manufacturing (Gortite).
Lath sections shall be an interlocking rib design and shall be individually replaceable without complete
disassembly of door.
Between each slat at the pivoting joint shall be a PVC inner seal to prevent metal to metal contact and
prevent dirt or moisture from entering the compartments. Seals shall allow door to operate in extreme
temperatures ranging from plus 180 to minus 40 degrees Fahrenheit. Side, top and bottom seals shall
be provided to resist ingress of dirt and weather and be made of Santoprene.
All hinges, barrel clips and end pieces shall be nylon 66. All nylon components shall withstand
temperatures from plus 300 to minus 40 degrees Fahrenheit. Hardened plastic shall not be acceptable.
A polished stainless steel lift bar to be provided for each roll-up door. Lift bar shall be located at the
bottom of door and have latches on the outer extrusion of the doors frame. A ledge shall be supplied
over lift bar for additional area to aid in closing the door.
Doors shall be constructed from an aluminum box section. The exterior surface of each slat shall be
flat. The interior surfaces shall be concave to provide strength and prevent loose equipment from
jamming the door from inside.