Specifications

37 of 104
A video button shall allow a NTSC signal into the information center to be displayed on the LCD. By
pressing any button while viewing a video feed shall return the information center to the vehicle
information screens.
A menu button shall provide access to maintenance, setup and diagnostic screens.
All other button labels shall be specific to the information being viewed.
GENERAL SCREEN DESIGN Bidder Complies: Yes ( ) No ( )
Where possible, background colors shall be used to provide "At a Glance" vehicle information. If
information provided on a screen is within acceptable limits, a green background shall be used. If a
caution or warning situation arises the following shall occur:
- An amber background/text color shall indicate a caution condition.
- A red background/text color shall indicate a warning condition.
Every screen shall include the following:
- Exterior Ambient Temperature
- Time (12 or 24 hour mode)
- Text Alert Center:
- The information center shall utilize an "Alert Center" to display text messages for audible
alarm tones. The text messages shall be written to identify the item(s) causing the audible
alarm to sound. If more than one (1) text message occurs, the messages shall cycle every
second until the problem(s) have been resolved. The background color for the "Alert Center"
shall change to indicate the severity of the "warning" message. If a warning and a caution
condition occur simultaneously, the red background color shall be shown for all alert center
messages.
- Button Labels: A label for each button shall exist. The label shall indicate the function for
each active button for each screen. Buttons that are not utilized on specific screens shall have
a button label with no text.
PAGE SCREENS Bidder Complies: Yes ( ) No ( )
The Information center shall include the following screens:
Load Manager Screen: A list of items to be load managed shall be provided. The list shall
provide:
- Description of the load
- Individual load shed priority: The lower the priority number the earlier the device
shall be shed should a low voltage condition occur.
- Load Status: The screen shall indicate if a load has been shed (disabled) or not shed.
"At a Glance" color features are utilized on this screen
Do Not Move Truck: The Do Not Move Truck screen shall indicate the approximate location and
type of item that is open or is not stowed for travel. The actual status of the following devices
shall be indicated:
- Driver Side Cab Door
- Passenger's Side Cab Door
- Driver Side Crew Cab Door