Specifications

33 of 104
Engine start switch: A two (2)-position momentary rocker switch shall be provided. The first switch
position is the default switch position. The second switch position shall activate the vehicle's
engine. The switch actuator is designed to prevent accidental activation.
4-way hazard switch: A two (2)-position maintained rocker switch shall be provided. The first switch
position shall deactivate the 4-way hazard switch function. The second switch position shall activate
the 4-way hazard function. The switch actuator shall be red and includes the international 4-way
hazard symbol.
Heater, defroster, and optional air conditioning control panel: A control panel with membrane switches
shall be provided to control heater/defroster temperature and heater, defroster, and air conditioning
fan speeds. A green LED status bar shall indicate the relative temperature and fan speed settings.
Turn signal arm: A self-canceling turn signal with high beam headlight and windshield wiper/washer
controls shall be provided. The windshield wiper control shall have high, low, and intermittent modes.
Parking brake control: An air actuated push/pull park brake control valve shall be provided.
Chassis horn control: Activation of the chassis horn control shall be provided through the center of the
steering wheel.
CUSTOM SWITCH PANELS Bidder Complies: Yes ( ) No ( )
The design of cab instrumentation shall allow for emergency lighting and other switches to be placed
within easy reach of the operator thus improving safety. There shall be positions for up to four (4)
switch panels in the overhead console on the driver's side, up to four (4) switch panels in the engine
tunnel console facing the driver, up to four (4) switch panels in the overhead console on the officer's
side and up to two (2) switch panels in the engine tunnel console facing the officer. All switches shall
have backlit labels for low light applications.
DIAGNOSTIC PANEL Bidder Complies: Yes ( ) No ( )
A diagnostic panel shall be accessible while standing on the ground and located inside the driver's side
door left of the steering column. The diagnostic panel shall allow diagnostic tools such as computers to
connect to various vehicle systems for improved troubleshooting providing a lower cost of
ownership. Diagnostic switches shall allow engine and ABS systems to provide blink codes should a
problem exist.
The diagnostic panel shall include the following:
- Engine diagnostic port
- Transmission diagnostic port
- ABS diagnostic port
- SRS diagnostic port (where applicable)
- Command Zone USB diagnostic port
- Engine diagnostic switch (blink codes flashed on check engine telltale indicator)
- ABS diagnostic switch (blink codes flashed on ABS telltale indicator)
- Diesel particulate filter regeneration switch (where applicable)
- Diesel particulate filter regeneration inhibit switch (where applicable)
CAB LCD DISPLAY Bidder Complies: Yes ( ) No ( )
A digital four (4)-row by 20-character dot matrix display shall be integral to the gauge panel. The
display shall be capable of showing simple graphical images as well as text. The display shall be split