Specifications

31 of 104
Amber indicator on gauge assembly with alarm
All gauges and gauge indicators shall perform prove out at initial power-up to ensure proper
performance.
INDICATOR LAMPS Bidder Complies: Yes ( ) No ( )
To promote safety, the following telltale indicator lamps shall be integral to the gauge assembly and
are located above and below the center gauges. The indicator lamps shall be "dead-front" design that
is only visible when active. The colored indicator lights shall have descriptive text or symbols.
The following amber telltale lamps shall be present:
- Low coolant
- Trac cntl (traction control) (where applicable)
- Check engine
- Check trans (check transmission)
- Aux brake overheat (Auxiliary brake overheat)
- Air rest (air restriction)
- Caution (triangle symbol)
- Water in fuel
- DPF (engine diesel particulate filter regeneration)
- Trailer ABS (where applicable)
- Wait to start (where applicable)
- HET (engine high exhaust temperature) (where applicable)
- ABS (antilock brake system)
- MIL (engine emissions system malfunction indicator lamp) (where applicable)
- SRS (supplemental restraint system) fault (where applicable)
-- DEF (low diesel exhaust fluid level)
The following red telltale lamps shall be present:
- Warning (stop sign symbol)
- Seat belt
- Parking brake
- Stop engine
- Rack down
The following green telltale lamps shall be provided:
- Left turn
- Right turn
- Battery on
The following blue telltale lamp shall be provided: