Specifications

29 of 104
There shall be one (1) audible alarm override switch provided, one (1) on the driver's side
cab instrument panel which shall deactivate the audible alarm when an occupant un-weights the seat
when the parking brake is released. And alarm shall chirp at one minute intervals as long as the
condition is present. Activation of the parking brake shall reset the override switches.
NFPA 1901, 2009 edition, section 14.1.3.10 requires a seat belt warning device.
The seat belt warning device is intended to assist the driver or officer in determining whether all
occupants are seated and belted before the vehicle is driven. The alarm shall be deactivated manually
by the switch whenever a new fault develops. Without this device the driver must manually determine
that all occupants are seated and belted before the apparatus is placed in motion.
HELMET HOLDER Bidder Complies: Yes ( ) No ( )
There shall be six (6) Zico UHH-1 helmet holder bracket(s) provided in the cab. The brackets shall
provide quick access and secure storage of the helmet(s). The bracket location(s) shall be determined
at time of final inspection.
CAB DOME LIGHTS Bidder Complies: Yes ( ) No ( )
There shall be two (2) Weldon LED dome lights, Model 8080/8081-8000-13 installed in the cab. The
lights shall be mounted above the inside shoulder of the driver and officer.
The forward, white, light shall be controlled by the door switch and the lens switch.
The rear, red, light shall be controlled by the lens switch only.
In addition, there shall be two (2) adjustable map lights with an integral switch recessed into the cab
ceiling. One (1) light shall be located above the driver's seat and one (1) light shall be located above
the officer's seat.
CREW CAB DOME LIGHTS Bidder Complies: Yes ( ) No ( )
There shall be two (2) Weldon, Model 8080-8000-13 LED dome lights with black bezels installed in the
crew cab and located one (1) each side, controlled by the following:
The forward, clear light shall be controlled by the door switch and the lens switch.
The rear, red light shall be controlled by the lens switch only.
A courtesy light at each door opening, controlled by automatic door switches
HAND HELD SPOTLIGHT Bidder Complies: Yes ( ) No ( )
There shall be four (5) Pelican Products, Model 9410 LED, 12v DC rechargeable lights mounted to be
determined.
The color shall be yellow.
Each charger shall be hard wired to the 12 VDC system.
CAB INSTRUMENTATION Bidder Complies: Yes ( ) No ( )
The cab instrument panel shall consist of gauges, an LCD display, telltale indicator lights, alarms,
control switches, and a diagnostic panel. The function of instrument panel controls and switches shall
be identified by a label adjacent to each item. Actuation of the headlight switch shall illuminate the
labels in low light conditions. Telltale indicator lamps shall not be illuminated unless necessary. The
cab instruments and controls shall be conveniently located within the forward cab section directly
forward of the driver. Gauge and switch panels shall be designed to be removable for ease of service
and low cost of ownership.
GAUGES Bidder Complies: Yes ( ) No ( )
The gauge panel shall include the following ten (10) ivory gauges with chrome bezels to monitor
vehicle performance: