Specifications

27 of 104

A seat safety system shall be included. When activated this system shall pretension the seat belt

and firmly hold the occupant in the event of a side roll.

The seat shall be furnished with a three (3)-point, shoulder type seat belt. To provide quick, easy use

for occupants wearing bunker gear, the seat belt shall have a minimum 120.00" shoulder length and

55.00" lap length. The seat belt tongue shall be stored at waist position for quick application by the

seat occupant. The seat belt receptacle shall be provided on a cable conveniently nested next to the

seat cushion, providing easy accessibility. The seat belt shall be furnished with dual automatic

retractors that shall provide ease of operation in the normal seating position.

EMS COMPARTMENT Bidder Complies: Yes ( ) No ( )

An EMS compartment, 21.00" wide x 44.00" high x 14.00" deep with one (1) Gortite roll up door, non-

locking, with white finish shall be provided in the crew cab.

The compartment shall be constructed of smooth aluminum, and painted to match the cab interior.

COMPARTMENT LIGHT Bidder Complies: Yes ( ) No ( )

There shall be one (1) On Scene Solutions LED strip light installed on the left side of the compartment

opening. The lights shall be controlled by an automatic door switch.

FORWARD FACING CENTER SEATS Bidder Complies: Yes ( ) No ( )

There shall be two (2) forward facing seats provided at the center position in the crew cab. For

optimal comfort, the seats shall be provided with 17.00" deep dual density foam cushions designed

with EVC (elastomeric vibration control). To ensure safe operation, the seats shall be equipped with

seat belt sensors in the seat cushion and belt receptacle that shall activate an alarm indicating a seat is

occupied but not buckled.

The seat backs shall be an SCBA back style with 7.50 degree fixed recline angle, and shall include

minimum 4.50" wide x 7.50" deep side bolster pads for maximum support. The SCBA cavity shall be

adjustable from front to rear in 1.00" increments, to accommodate different sized SCBA

cylinders. Moving the SCBA cavity shall be accomplished by unbolting, relocating, and re-bolting it in

the desired location.

The seats shall include the following feature incorporated into the side roll protection system.

A seat safety system shall be included. When activated, this system shall pretension the seat belts

around the occupants to firmly hold them in place in the event of a side roll.

The seats shall be furnished with three (3)-point, shoulder type seat belts. To provide quick, easy use

for occupants wearing bunker gear, the seat belts shall have a minimum 130.00" shoulder length and