Specifications

26 of 104
Side air curtain shall be mounted integral to the outboard bolster of the seat back. The air curtain
shall be covered by a decorative panel when in the stowed position.
A suspension seat safety system shall be included. When activated this system shall pretension the
seat belt and then retract the seat to its lowest travel position.
The seat shall be furnished with a three (3)-point, shoulder type seat belt. To provide quick, easy use
for occupants wearing bunker gear, the seat belt shall have a minimum 120.00" shoulder length and
55.00" lap length. The seat belt tongue shall be stored at waist position for quick application by the
seat occupant. The seat belt receptacle shall be provided on a cable conveniently nested next to the
seat cushion, providing easy accessibility. The seat belt shall be furnished with dual automatic
retractors that shall provide ease of operation in the normal seating position.
REAR FACING DRIVER SIDE OUTBOARD SEAT Bidder Complies: Yes ( ) No ( )
There shall be One (1) rear facing seat provided at the driver side outboard position in the crew
cab. For optimal comfort, the seat shall be provided with 17.00" deep dual density foam cushions
designed with EVC (elastomeric vibration control). To ensure safe operation, the seat shall be
equipped with seat belt sensors in the seat cushion and belt receptacle. It shall activate an alarm
indicating a seat is occupied but not buckled.
The seat back shall be an SCBA back style with 7.50 degree fixed recline angle, and shall include
minimum 4.50" wide x 7.50" deep side bolster pads for maximum support. The SCBA cavity shall be
adjustable from front to rear in 1.00" increments, to accommodate different sized SCBA
cylinders. Moving the SCBA cavity shall be accomplished by unbolting, relocating, and re-bolting it in
the desired location.
The seat shall include the following features incorporated into the side roll protection system.
Side air curtain shall be mounted integral to the outboard bolster of the seat back. The air curtain
shall be covered by a decorative panel when in the stowed position.
A seat safety system shall be included. When activated this system shall pretension the seat belt
around the occupant to firmly hold them in place in the event of a side roll.
The seat shall be furnished with a three (3)-point, shoulder type seat belt. To provide quick, easy use
for occupants wearing bunker gear, the seat belt shall have a minimum 120.00" shoulder length and
55.00" lap length. The seat belt tongue shall be stored at waist position for quick application by the
seat occupant. The seat belt receptacle shall be provided on a cable conveniently nested next to the
seat cushion, providing easy accessibility. The seat belt shall be furnished with dual automatic
retractors that shall provide ease of operation in the normal seating position.
REAR FACING PASSENGER SIDE OUTBOARD SEAT Bidder Complies: Yes ( ) No ( )
There shall be one (1) rear facing seat provided at the passenger side outboard position in the crew
cab. For optimal comfort, the seat shall be provided with 17.00" deep dual density foam cushions
designed with EVC (elastomeric vibration control). To ensure safe operation, the seat shall be
equipped with seat belt sensors in the seat cushion and belt receptacle that shall activate an alarm
indicating a seat is occupied but not buckled.
The seat back shall be an SCBA back style with 7.50 degree fixed recline angle, and shall include
minimum 4.50" wide x 7.50" deep side bolster pads for maximum support. The SCBA cavity shall be
adjustable from front to rear in 1.00" increments to accommodate different sized SCBA
cylinders. Moving the SCBA cavity shall be accomplished by unbolting, relocating, and re-bolting it in
the desired location.
The seat shall include the following features incorporated into the side roll protection system.
Side air curtain shall be mounted integral to the outboard bolster of the seat back. The air curtain
shall be covered by a decorative panel when in the stowed position.