Specifications

21 of 104
DUAL STEPS Bidder Complies: Yes ( ) No ( )
A dual step shall be provided below each cab and crew cab door. The steps shall be designed with a
grip pattern punched into bright aluminum treadplate material providing support, slip resistance, and
drainage. The steps shall be a bolt-on design and provide a 24.00" wide x 7.00" deep stepping
surface. The step design raises the middle step higher and closer to the cab floor, resulting in a 12.00"
distance from the step to cab floor in the cab and a 13.50" distance from the step to cab floor in the
crew cab. Stepping distances from the ground to first step shall be 16.50" and from first step to
middle step shall be 12.00".
STEP LIGHTS Bidder Complies: Yes ( ) No ( )
For reduced overall maintenance costs compared to incandescent lighting, there shall be four (4) white
LED, step lights provided. The lights shall be installed at each cab and crew cab door, one (1) per
step, in the driver side front doorstep, driver side crew cab doorstep, passenger side front doorstep
and passenger side crew cab doorstep.
In order to ensure exceptional illumination, each light shall provide a minimum of 25 foot-candles (fc)
covering an entire 15" x 15" square placed ten (10) inches below the light and a minimum of 1.5 fc
covering an entire 30" x 30" square at the same ten (10) inch distance below the light.
The lights shall be activated when the adjacent door is opened.
FENDER CROWNS Bidder Complies: Yes ( ) No ( )
Stainless steel fender crowns shall be installed at the cab wheel openings.
CREW CAB WINDOWS Bidder Complies: Yes ( ) No ( )
One (1) fixed window with tinted glass shall be provided on each side of the cab, to the rear of the
front cab door. The windows shall be sized to enhance light penetration into the cab interior. The
windows shall measure 20.00" wide x 20.50" high.
WINDOW INTERIOR TRIM Bidder Complies: Yes ( ) No ( )
For improved aesthetics, the cab side windows shall include a vacuum formed ABS interior trim panel.
ENCLOSURE AROUND NIGHT SCAN Bidder Complies: Yes ( ) No ( )
An enclosure shall be installed on three (3) sides of the Night Scan light on the cab roof. The back side
shall be open to prevent water and debris from collecting in the Night Scan area. The enclosure shall
be constructed out of aluminum and painted to match the cab roof. The sides of the enclosure shall be
even with the top of the Night Scan light in the stored position.
MOUNTING FLOOR Bidder Complies: Yes ( ) No ( )
A .188 aluminum plate shall be installed on the horizontal surface of the engine tunnel to the rear of
the instrument console with work surface. This plate shall be spaced to make its surface even with
that of the instrument console's work surface.
The aluminum shall cover the entire rear surface of the engine tunnel. The aluminum shall be
approximately 35.00" wide x 23.00" long.
Painted to match the interior of the cab
CAB INTERIOR Bidder Complies: Yes ( ) No ( )
With safety as the primary objective, the wrap-around style, high impact ABS polymer cab instrument
panel shall be designed with unobstructed visibility to instrumentation. The dash layout shall provide
the driver with a quick reference to gauges that allows more time to focus on the road. The center
console shall be a high impact ABS polymer, and shall be easily removable for access to the
defroster. The center console shall include louvers strategically located for optimal air flow and defrost
capability to the windshield. The passenger side dashboard shall be constructed of painted aluminum
for durability and low maintenance. For enhanced versatility, the passenger side dash shall include a
flat working surface. To provide optional (service friendly) control panels, switches and storage