Specifications

16 of 104
GRAVEL PAN Bidder Complies: Yes ( ) No ( )
A gravel pan, constructed of bright aluminum treadplate, shall be furnished between the bumper and
the cab face. The pan shall be properly supported from the underside to prevent flexing and vibration.
Documentation shall be provided, upon request, to show that the options selected have been
engineered for fit-up and approval for this modular bumper extension. A chart shall be provided to
indicate the option locations and shall include, but not be limited to, the following options: air horns,
mechanical sirens, speakers, hose trays (with hose capacities), winches, lights, discharge and suction
connections.
LIFT AND TOW MOUNTS Bidder Complies: Yes ( ) No ( )
Mounted to the frame extension shall be lift and tow mounts. The lift and tow mounts shall be
designed and positioned to adapt to certain tow truck lift systems.
The lift and tow mounts with eyes shall be painted the same color as the frame.
TOW HOOKS Bidder Complies: Yes ( ) No ( )
No tow hooks are to be provided. This truck shall be equipped with a lift and tow package with
integral tow eyes.
HOSE TRAY Bidder Complies: Yes ( ) No ( )
A hose tray, constructed of aluminum, shall be placed in the center of the bumper extension.
The tray shall be 24" wide and have a capacity of 150' of 1.75" double jacket cotton-polyester hose.
Black rubber grating shall be provided at the bottom of the tray. Drain holes are also provided.
GRAVEL PAN Bidder Complies: Yes ( ) No ( )
A gravel pan, constructed of bright aluminum treadplate, shall be furnished between the bumper and
cab face.
The gravel pan shall be properly supported from the underside to prevent flexing and vibration of the
aluminum treadplate.
HINGED CENTER SECTION Bidder Complies: Yes ( ) No ( )
The center section of the bumper shall be hinged at the bottom. Two (2) pawl latches shall hold the
section in the closed position.
HOSE TRAY COVER Bidder Complies: Yes ( ) No ( )
A bright aluminum treadplate cover shall be provided over the one (1) hose tray.
The cover shall be attached with a stainless steel hinge and located on the passenger side hose tray.
A lift and turn latch shall secure the cover in the closed position and a pneumatic stay arm shall hold
the cover in the open position.
COVER, HOSE TRAY Bidder Complies: Yes ( ) No ( )
A bright aluminum treadplate cover shall be provided over the one (1) hose tray.
The cover shall be "notched" allowing the hose to be preconnected to hose connection.
The cover shall be attached with a stainless steel hinge.
A high pressure gas spring shall hold the cover in the open and closed position.
A chrome grab handle shall be attached for opening the cover.
Notch in the cover for pre-connected 1.75" hose