Specifications

102 of 104
from failures caused by defects in material and workmanship that would arise under normal use and
service.
A copy of the warranty certificate shall be submitted with the bid package (No Exception).
TEN (10) YEAR PUMP PLUMBING WARRANTY Bidder Complies: Yes ( ) No ( )
The stainless steel plumbing components and ancillary brass fittings used in the construction of the
water/foam plumbing system shall be warranted for a period of ten (10) years or 100,000
miles. This covers structural failures caused by defective design or workmanship, or perforation
caused by corrosion, provided the apparatus is used in a normal and reasonable manner. This
warranty is extended only to the original purchaser for a period of ten years from the date of delivery.
A copy of the warranty certificate shall be submitted with the bid package. (no exception)
TEN (10) YEAR PRO-RATED PAINT AND CORROSION Bidder Complies: Yes ( ) No ( )
Each new piece of apparatus shall be provided with a ten (10) year pro-rated paint and
corrosion limited warranty on the apparatus body. The warranty shall cover painted exterior surfaces
of the body to be free from blistering, peeling, corrosion, or any other adhesion defect caused by
defective manufacturing methods or paint material selection that would arise under normal use and
service.
A copy of the warranty certificate shall be submitted with the bid package (No Exception).
THREE (3) YEAR MATERIAL AND WORKMANSHIP Bidder Complies: Yes ( ) No ( )
The gold leaf lamination shall be provided with a three (3) year material and workmanship limited
warranty. The warranty shall cover the gold leaf lamination as being free from defects in material and
workmanship that would arise under normal use and service.
A copy of the warranty certificate shall be submitted with the bid package (No Exception).
VEHICLE STABILITY CERTIFICATION Bidder Complies: Yes ( ) No ( )
The fire apparatus manufacturer shall provide a certification stating the apparatus complies with NFPA
1901, current edition, section 4.13, Vehicle Stability. The certification shall be provided at the time of
bid.
ENGINE INSTALLATION CERTIFICATION Bidder Complies: Yes ( ) No ( )
The fire apparatus manufacturer shall provide a certification, along with a letter from the engine
manufacturer stating they approve of the engine installation in the bidder's chassis. The certification
shall be provided at the time of bid.
POWER STEERING CERTIFICATION Bidder Complies: Yes ( ) No ( )
The fire apparatus manufacturer shall provide a certification stating the power steering system as
installed meets the requirements of the component supplier. The certification shall be provided at the
time of bid.
CAB INTEGRITY CERTIFICATION Bidder Complies: Yes ( ) No ( )
The fire apparatus manufacturer shall provide a cab integrity certification with this proposal. The
certification shall state that the cab has been tested and certified by an independent third-party test
facility. Testing events shall be documented with photographs, real-time and high-speed video, vehicle
accelerometers, cart accelerometers, and a laser speed trap. The fire apparatus manufacturer shall
provide a state-licensed professional engineer to witness and certify all testing events. Testing shall
meet or exceed the requirements below:
- European Occupant Protection Standard ECE Regulation No.29.
- SAE J2422 Cab Roof Strength Evaluation - Quasi-Static Loading Heavy Trucks.
- SAE J2420 COE Frontal Strength Evaluation - Dynamic Loading Heavy Trucks.