Specifications

98 of 104
The colors shall be red and fluorescent yellow green diamond grade.
Each stripe shall be 6.00" in width.
This shall meet the requirements of NFPA 1901, 2009 edition, which states that 50% of the rear
surface shall be covered with chevron striping.
STRIPE, REFLECTIVE, "S" RIBBON Bidder Complies: Yes ( ) No ( )
"S" type ribbon(s) shall be added to the reflective stripe front body compartment. Areas adjacent to
the "S" portion of the stripe shall be shaded and highlighted with an air brush to give it a ribbon
affect. There shall be one (1) pair on the vehicle.
OUTLINE, REFLECTIVE STRIPE Bidder Complies: Yes ( ) No ( )
A Black outline shall be applied on the top and the bottom of the reflective band. There shall be one
(1) set of outline stripes required.
OUTLINE, REFLECTIVE STRIPE Bidder Complies: Yes ( ) No ( )
A black vinyl outline shall be provided for each chevron stripe at the rear of the truck.
SLIDE OUT TRAY REFLECTIVE STRIPES Bidder Complies: Yes ( ) No ( )
There shall be ruby red reflective stripes installed on the front and sides of 11 slide out tray(s) located
all slide-out trays and tool boards.
CHEVRON, INVERTED "V" STRIPING ON CAB AND CREW CAB DOORS Bidder Complies:
Yes ( ) No ( )
There shall be alternating chevron striping located on the inside of each cab and crew cab door.
The striping shall consist of the following colors:
The first color shall be fluorescent yellow green diamond grade
The second color shall be red diamond grade
The size of the striping shall be 4.00".
BODY STRIPE Bidder Complies: Yes ( ) No ( )
There shall be a genuine gold leaf stripe provided on each side of the body, located along the top of
the side compartmentation.
CAB STRIPE Bidder Complies: Yes ( ) No ( )
There shall be a genuine gold leaf stripe provided on both sides of the cab in place of the chrome
molding and on the cab face with shield.
LETTERING Bidder Complies: Yes ( ) No ( )
The lettering shall be totally encapsulated between two (2) layers of clear vinyl.
LETTERING Bidder Complies: Yes ( ) No ( )
One (1) to twenty (20) genuine gold leaf lettering, 3.00" high, with outline and shade shall be
provided.
LETTERING Bidder Complies: Yes ( ) No ( )
One (1) to twenty (20) genuine gold leaf lettering, 10.00" high, with outline and shade shall be
provided.
LETTERING Bidder Complies: Yes ( ) No ( )
There shall be genuine gold leaf lettering, 10.00" high, with outline and shade provided. There shall be
four (4) letters provided.
CAB GRILLE DESIGN Bidder Complies: Yes ( ) No ( )
An American flag design shall be painted on the cab grille.