Specifications

DM562P
Operation Manual & AT Command Set
Integrated Data/Fax/Voice/Speakerphone Modem
16 Preliminary
Version: DM562P-MA-P01
July 12, 2000
+FRH=n Recevie data with HDLC framing. An
ERROR response code results if this
command is issued while the modem is
on-hook. +FRH > 3 is available when
V.34 mode.
+FRH=3 V.21 channel 2 300bps
+FRH=24 V.27 ter 2400bps
+FRH=48 V.27 ter 4800bps
+FRH=72 V.29 ter 7200bps
+FRH=73 V.17 ter 7200bps long
+FRH=74 V.17 ter 7200bps short
+FRH=96 V.29 ter 9600bps
+FRH=97 V.17 ter 9600bps long
+FRH=98 V.17 ter 9600bps short
+FRH=121 V.17 ter 12000bps long
+FRH=122 V.17 ter 12000bps short
+FRH=145 V.17 ter 14400bps long
+FRH=146 V.17 ter 14400bps short
The Fax class 1 mode Result codes are:
OK Command valid and executed successfully.
ERROR Command error and can not be
executed.
CONNECT The DCE has entered the data transfer
state.
NO CARRIER The selected carrier is not being
received. Possible causes include –
loss of carrier within default or DTE
specified time-out, time-out associated
with the absence of selected carrier, or
character abort.