Specifications

DM562P
Operation Manual & AT Command Set
Integrated Data/Fax/Voice/Speakerphone Modeml
Preliminary 15
Version: DM562P-MA-P01
July 12, 2000
PART II : FAX Command
Fax Class 1 Command
+FCLASS=n Data, Fax or Voice Mode Selection.
+FCLASS=0 Selects Data mode operation.
+FCLASS=1 Selects Fax Class 1 mode operation.
+FCLASS=8 Selects voice mode operation.
+FAE=n Data/Fax Auto answer.
+FAE=0 Disables Fax Auto Answer operation
+FAE=1 Enables Auto detection of Data or Fax
operations.
+F<command>? Report active configuration.
+FAE? 0 if auto answer is disabled;
1 if auto answer is enabled
+FCLASS? 0 if wet select data mode;
1 if wet select Fax class 1 mode;
8 if wet select voice mode;
+F<command>? Report operating capabilities.
+FAE=? 0,1
+FCLASS=? 0,1,8
+FTM=? 24,48,72,73,74,96,97,98,121,122,145,146
+FRM=? 24,48,72,73,74,96,97,98,121,122,145,146
+FMI? Request Manufacturer Information.
+FMM? Request Model Information.
+FREV? Request Revision Information.
+
+FTS=n Stop transmit and wait for the specified
amount of time and then sends OK
result code to the DTE.
+FRS=n This command causes the DCE to
listen and to report back an OK result
code when silence has been present on
the line for the amount of time specified.
+FTM=n Transmit data using the modulation
defined below. An ERROR response
code results if this command is issued
while the modem is on-hook.
+FTM=24 V.27 ter 2400bps
+FTM=48 V.27 ter 4800bps
+FTM=72 V.29 ter 7200bps
+FTM=73 V.17 ter 7200bps long
+FTM=74 V.17 ter 7200bps short
+FTM=96 V.29 ter 9600bps
+FTM=97 V.17 ter 9600bps long
+FTM=98 V.17 ter 9600bps short
+FTM=121 V.17 ter 12000bps long
+FTM=122 V.17 ter 12000bps short
+FTM=145 V.17 ter 14400bps long
+FTM=146 V.17 ter 14400bps short
.
+FRM=n Receive data. An ERROR response
code results if this command is issued
while the modem is on-hook.
+FRM=24 V.27 ter 2400bps
+FRM=48 V.27 ter 4800bps
+FRM=72 V.29 ter 7200bps
+FRM=73 V.17 ter 7200bps long
+FRM=74 V.17 ter 7200bps short
+FRM=96 V.29 ter 9600bps
+FRM=97 V.17 ter 9600bps long
+FRM=98 V.17 ter 9600bps short
+FRM=121 V.17 ter 12000bps long
+FRM=122 V.17 ter 12000bps short
+FRM=145 V.17 ter 14400bps long
+FRM=146 V.17 ter 14400bps short
+FTH=n Transmit data with HDLC framing. An
ERROR response code results if this
command is issued while the modem is
on-hook. +FTH > 3 is available when
V.34 mode.
+FTH=3 V.21 channel 2 300bps
+FTH=24 V.27 ter 2400bps
+FTH=48 V.27 ter 4800bps
+FTH=72 V.29 ter 7200bps
+FTH=73 V.17 ter 7200bps long
+FTH=74 V.17 ter 7200bps short
+FTH=96 V.29 ter 9600bps
+FTH=97 V.17 ter 9600bps long
+FTH=98 V.17 ter 9600bps short
+FTH=121 V.17 ter 12000bps long
+FTH=122 V.17 ter 12000bps short
+FTH=145 V.17 ter 14400bps long
+FTH=146 V.17 ter 14400bps short