Specifications

DM562AP
V.90 Integrated Data/ Fax/Voice/Speakerphone
Modem Device Single Chip with Memory Built in
Power Management Register (Xxxxxx50h~PMR)
31 16 15 087
Power Management Capabilities
Next Item Pointer
Capability Identifier
PMC Next Item Pointer Capability ID
Bit Default Type Description
31:27 00000
RO
_WR
PME_Support
This five-bit field indicates the power states in which the function may
assert PME#. A value of 0 for any bit indicates that the function is not
capable of asserting the PME# signal while in that power state.
bit27 Æ PME# support D0
bit28 Æ PME# support D1
bit29 Æ PME# support D2
bit30 Æ PME# support D3(hot)
bit31 Æ PME# support D3(cold)
DM6588A’s bit31~27=11000 indicates PME# can be asserted from D3(hot)
& D(cold).
26:22 00000
RO
Reserved (DM6588A not supports D1, D2)
21 0
RO
A “1” indicates that the function requires a device specific initialization
sequence following transition to the D0 un-initialized state.
20 1
RO
Auxiliary Power Source
This bit is only meaningful if bit31 is a “1”.
This bit is “1” in DM6588A indicates that support for PME# in D3 (cold)
requires auxiliary power.
19 0
RO
PME# Clock
“0” indicates that no PCI clock is required for the function to generate
PME#.
18:16 001
RO
Version
A value of 001 indicates that this function complies with the Revision 1.0 of
the PCI Power Management Interface Specification.
15:8 00h
RO
Next Item Pointer
The offset into the function’s PCI Configuration Space pointing to the
location of next item in the function’s capability list is “00h”
7:0 01h
RO
Capability Identifier
When “01h” indicates the linked list item as being the PCI Power
Management Registers.
Final 31
Version: DM562AP-DS-F03
Nov. 09, 2007