User Manual

* All of these menus are not visible unless Pump 1 is congured to be a Jockey Pump

1 Menu only visible if the JP Standby Test mode is set to the matching function.

2 Appears when Jockey Pump Mode is set to DOL

3 When Jockey Pump Mode is set to DOL this optional has no function and will not be visible

4 Not visible when JP Use Main SP) Set Point) is set to YES

Sub Menu Units Range Defaults

JOCKEY PUMP

* Jockey Pump Mode selection

Main VFD, Separate

VFD, DOL

Main VFD

* JP Cut In Pressure % of JP Setpoint 0 - 9999 83.3

2 JP Cut Out Pres Unitless 0 - 9999 300

* 3 JP Set Point Unitless 0 - 9999 300

* JP Flow Rate /Sec 0 - 9999 50

* 3 JP Response Rate % 0.1 - 100.0 3.0

* JP Acceleration %/second 1 - 100 20

* 3 JP Standby Test selection

Off,Boost,Flow Switch,

Flow Rate

Boost

* 1 3 JP Standby Boost % of JP Setpoint 5 - 250 6.6

* 1 3 JP Stdby FlowMin /Sec 0 - 250 5

* JP Run On Time seconds 0 - 999 1

* JP Restart Delay seconds 0 - 999 0

* 3 JP Use Main SP selection Yes, No No

* 3 JP Min Frequency % 0.0 - 100.0 10

* 3 JP ErrorCorr’t (I seconds Off, 0.1- 100.0 15

* 3 JP OverShtElim (D % Off, 0.01 - 50.00 4

Sub Menu

Units

Range

Defaults

TIME OF DAY SP

Set Point 2 Time time Disabled, 00:00 - 23:59 Disabled

Set Point 3 Time time Disabled, 00:00 - 23:59 Disabled

Set Point 4 Time time Disabled, 00:00 - 23:59 Disabled

Set Point 5 Time time Disabled, 00:00 - 23:59 Disabled

Set Point 6 Time time Disabled, 00:00 - 23:59 Disabled

Set Point 7 Time time Disabled, 00:00 - 23:59 Disabled

Set Point 8 Time time Disabled, 00:00 - 23:59 Disabled