Instruction Manual
SP500 Spa Pool
Controllers User Guide
WARNING: Before using ensure that the spa pool has been connected to a suitable weather protected
outlet socket, equipped with a double pole isolating switch, which is of the correct rating and complies with the
local wiring regulations.
When installing, refer to your local wiring code. In particular refer to ECP2 & ECP25 (AS/NZ) and EN60364-
4-1 & EN60364-7-1 (EU). The system must be installed in such a way that live parts are not accessible by
a person in the pool. If a supply cord is not tted the system must be permanently connected to xed wiring
through a 30mA or less RCD.
It is recommended that the steel reinforcing in any concrete base on which the pool is sitting be equipotential
bonded to the earth conductor in the supply to the spa. This is to protect against the possibility of low voltage
shocks caused by differential earth voltages. Refer to AS/NZS3000:2000 Sections 5.8 & 7.2 or EN 60364.
WARNING: This appliance is not intended for use by young children or inrm persons without supervision.
Young children should be supervised to ensure they do not play with the appliance.
WARNING: This product must be covered by an enclosure to prevent water ingress.
If the supply cord is damaged, it must be replaced by Davey, a Davey service agent, or a
similarly qualied person in order to avoid a hazard.