Manual

Page26
8.ADV.OPTIONS
----
(SUBMENU)
()
()
(ESC)
()
()
----
ADVOPTIONS
Push8
1.HEATCONTROL
2.HIGHHTOFFS
3.FILT.PERIOD*
4.FILT.TIME*
(SET)
()
()
O.50
1.HEATCONTROL
ScrolltoSET
1.SETTEMP
2.USERTIMER
3.CLOCK
4.USERALARM
5.SLEEPTIMES
6.MAINTTIMERS
7.MISCOPTIONS
9.LD.DEFAULTS
8.ADV.OPTIONS
*N/A circulationpumpinstallations
SelectMAINmenuthenpushUP button8times
7.8.7PanelAndPoolLightSynchronisation(on/off)
TheSP1200touchpadbacklighthastheabilitytomirrorthecolourandintensityofthein-poolSpaPowerVariable
ColourLight(SPVCL). Thisfeatureismostnoticeablewhenalighteffectmodeisbeingusedandthelightcolouris
changingrapidly.
Whenthepoollightisturnedoffthetouchpadbacklightwillremainoneuserselectablefixedcolour.Ifdesiredthe
synchronising/mirroringfeaturecanbedisabledandthetouchpadbacklightwillremainonthefixedcoloureven
whenthepoollightisturnedon.
7.8.8Enabling/DisablingLightSynchronisation
7.9AdvancedOptionsSubmenu
Theadvancedoptionsmenucontainssettingsthatshouldonlybemodifiedafteryouarefamiliarwiththebasic
operationofthespa. Thedefaultswillgenerallybesatisfactoryandwillprobablynotneedtobechanged.
1) SelecttheMISCOPTIONSsubmenufromthemainmenu.
2) SelectthePANEL &POOL LT.SYNCmenuitem
3) PresstheSCROLL buttonmodifylightsynchronisationsetting
4) UsetheUP andDOWNbuttonstotogglebetweenonandoff
5) PresstheSCROLL buttontoset.
Note: ThisoptionisonlyavailableifaSPVCL (SpaPowerVariableColourLight)isinthepool.
Page7
3.3Pump1 (Twospeed,24HRcirculationpumpfitted)
Thispumpiscontrolledviatwotouchpadbuttons-onetoturnthepumpon/offandanothertochangeitsspeed.
ThemodeandpumpspeedselectedbythesebuttonsareshownforafewsecondsontheLCDdisplayaswellas
beingindicatedbythepumpbuttonLEDs.
ThetwopumpbuttonLEDsaregreen,redoroffwhenthepumpison-
low,on-highoroff.
Twopushesoftheon/offbuttoncyclesthepumpasfollows:
Twopushesoftheon/offbuttoncyclesthepumpasfollows:
Notes:
1) Iflefton,thesepumpswillautomaticallyswitchoffafter25minutes.
2) Iftheheaterelementison,runningeitherpumpinhighspeedmodemaycausetheheatertoloadshedand
switchoff.Ifthisoccurstheheaterwillcomebackonapproximately5secondsafterhighspeedisdeselected
(pumprunninginlowspeedorpumpoff).
Pump1
Pump2
Push1 (PumpOn)
Push2 (PumpOff)
LCDdisplays “PUMP OFF”,buttonLEDsoff. TheHi/Lowspeedbuttonhasnoeffectinthismode.
Push1 (PumpHi)
Push2 (PumpLow)
TheHi/Lowspeedbuttoncanbeusedtochangethepumpspeed:
Push1 (PumpOn)
Push2 (PumpOff)
LCDdisplays “PUMP OFF”,buttonLEDsoff. TheHi/Lowspeedbuttonhasnoeffectinthismode.
Push1 (PumpHi)
Push2 (PumpLow)
TheHi/Lowspeedbuttoncanbeusedtochangethepumpspeed: