Manual

Page28
7.9.4ChangingTheHighHeatOffsetSetting
1) Selectthe ADV.OPTIONSsubmenufromthemainmenu.
2)
SelecttheHIGHHT OFFSmenuitem.
3) PresstheScrollbuttontobeginhighheatoffsetmodification.
4) UsetheUP andDOWNbuttonstoadjusttheoffsetasrequired.Holddowneitherbuttonforautomatickeypress
repeat.
5) PresstheSCROLL buttontoconfirmthecurrentsettingandreturntothe ADV.OPTIONSsubmenu.
7.9.5AutoFiltration/Sanitising(N/Afor24HRCircInstallations)
Automaticfiltrationisprovidedtoensurethatthepoolwaterisfilteredforatleastaminimumtimeeachday
regardlessofhowoftenthepoolisusedfornormaloperationorhowlongthepumprunsforheatmaintenance.Ifthe
pumphasnotrunlongenoughduringnormaloperationthesystemwillautomaticallyrunitforanadditionalperiodto
meettheminimumfiltrationtimeasspecifiedbytheuser
. Thisfeatureisespeciallyusefulinwarmerclimateswhere
verylittleautomaticheating(andhencewaterfiltration)isnecessarytokeepthepoolwateratthesettemperature.
Automaticfiltrationconsistsoftwouseradjustablesettings-Filtration TimeandFiltrationPeriod. Thesesettingsare
locatedintheadvancedoptionssubmenu.
7.9.6AdjustingTheFiltrationTime
TheFiltration Timesettingspecifiestheminimumfiltrationtimeandcanbeadjustedbetween0and30minutesper
hour(effectively0to12hoursperday),default10minutes. A settingof0minutestotallydisablesautomaticfiltration.
1) Selectthe ADV.OPTIONSsubmenufromthemainmenu.
2) SelecttheFILT. TIMEmenuitem.
3) PresstheSCROLL buttontobeginFiltration Timemodification.
4) UsetheUP andDOWNbuttonstosetthedesiredfiltrationtimeinminutesperhour.
5) PresstheSCROLL buttontoconfirmthecurrentsettingandreturntothe ADV.OPTIONSsubmenu.
7.9.7AdjustingTheFiltrationPeriod
TheFiltrationPeriodsettingspecifieshowoftenthesystemshouldrunthepumptoensuretheminimumfiltrationtime
ismet. Availablesettingsare1,2,3or4hours. Atthedefaultsettingof1hour,thepumpwillcomeonnomorethan
onceanhourtoensurefiltrationtimesaremet,similarlyasettingof4hoursindicatesthatafiltrationrunwilloccur
onceevery4hours.
1) Selectthe ADV.OPTIONSsubmenufromthemainmenu.
2) SelecttheFILT. TIMEmenuitem.
3) PresstheSCROLL buttontobeginFiltrationPeriodmodification.
4) UsetheUP andDOWNbuttonstosetthedesiredfiltrationperiod.
5) PresstheSCROLL buttontoconfirmthecurrentsettingandreturntothe ADV.OPTIONSsubmenu.
Pleasenotethatalthoughthefiltrationperiodrestrictshowoftenfiltration-onlyrunsoccur,normalheatingmaintenance
maytakeplaceinbetweenthefiltrationruns.Ifthisoccursitmayappearasthoughthefiltrationperiodsettingisnot
functioningcorrectly,howeverthisbehaviourisnormal.Excessivecyclingofthespawillnotbecuredbyincreasing
thefiltrationperiod,pleaseread “HeatControl” formoreinformation.
Notes
1) Oneverydayoftheyearweexperiencedifferentambienttemperatures. Asaresultthespapumpwillrunfor
differentperiodsatdifferenttimeseveryday,dependingonhowoftenthepumprunstoheatthewater.
2) Anymodificationoffiltrationsettings(eithertimeorperiod)willcausethecurrentfiltrationtimingtoberesetand
automaticfiltrationmaintenancewillnotcontinueuntilthefirsthourofthenextfiltrationperiod.
3) Filtrationcycleswillalwaystriggerheatingifthepoolisbelowthetemperaturesetpointregardlessoftheheat
modesetting.
4) Filtrationdoesnotoperateduringsleepperiods.
PushbuttontoturnblowerON/OFFandselectoperatingmode(HIGH,RAMPING,VARIABLESPEED)
Lightlevelbutton:PushtoturnlightON/OFFandalterbrightness.
Lightmodebutton:Pushtochangethelighteffects.
MAINMENU
----
ESC
()
()
()
Push1=MainMenudisplayappears(seebelow)
Or
Push1=Set Tempdisplayappears(seebelow)
1.SETTEMP
()
()
(SET)
38.00
C
O
Usetheupanddownbuttonstoselectdesiredtemperature
PushtheScrollbuttontosavethecurrentsetting.
Page5
PushtheSCROLL buttontoaltertemperature
Formoredetailedinformationpleaseseesection5.
Formoredetailedinformationpleaseseesection6.
Formoredetailedinformationpleaseseesection6.2
2.4VariableSpeedBlowerOperation
2.5VariableColourLightOperation
2.6SettingTheTemperature
Usetheupanddownbuttonstoadjusttheblowerspeed