Manual

User’sGuide QuickReference
2.1.1TwoSpeed(no24hrcirculationpump)
Section2.0
2.1.2TwoSpeed(24hrcirculationpumpfitted)
Pump1Bbutton:Pushtochangepumpspeed(LOW,HIGH)
2.1.3SingleSpeed(no24hrcirculationpump)
Pump1Bbutton:PushtoturnON/OFFadditionalpump(iffitted)
2.1.4SingleSpeed(24hrcirculationpumpfitted)
Pump1A button:PushbuttontoturnpumpON/OFF
Page4
Pump1A button:PushtoturnpumpON/OFF
Pump1Bbutton:Pushtochangepumpspeed(LOW
,HIGH)
Pump1Bbutton:PushtoturnON/OFFadditionalpump(iffitted)
Pump1A button:Pushtochangepumpmode(PUMP AUTO,MANUAL ON,MANUAL OFF)
Pump1A button:Pushtochangepumpmode(PUMP AUTO,MANUAL ON,MANUAL OFF)
2.3Aux(Pump,Blower,Light)
Pushbuttontoturn AuxoutputON/OFF
Formoredetailedinformationpleaseseesection3.
2.2.2TwoSpeedPump
2.2.1SingleSpeedPump
Pump2A button:PushtoturnON/OFFadditionalpump(iffitted)
Pump2Bbutton:PushtoturnON/OFFadditionalpump(iffitted)
Pump2A button:PushtoturnpumpON/OFF
Pump1Bbutton:Pushtochangepumpspeed(LOW,HIGH)
2.1Pump1Operation
2.2Pump2Operation
Formoredetailedinformationpleaseseesection4.
Formoredetailedinformationpleaseseesection3.
9.LD.DEFAULTS
----
(SET)
()
()
[NO]
()
()
----
AREYOUSURE?
Push9
ScrolltoSET
NO
[YES]
[
]
1.SETTEMP
2.USERTIMER
3.CL
OCK
4.USERALARM
5.SLEEPTIMES
6.MAINTTIMERS
7.MISCOPTIONS
8.ADV.OPTIONS
9.LD.DEFAULTS
Page29
SelectMAINmenuthenpushUP buttonninetimes
7.10LoadFactoryDefaultSettings
Theloaddefaultsoptionprovidesawayofrestoringallfactorydefaultsettings. Theseincludeobvioussetup
parameterssuchassettemperatureandsleeptimesbutalsosettingssuchaspreferredlightmode,lightef
fect
speedsandblowerspeedwillberestoredtotheirfactorydefaults.Onlyusethisoptionifyouareabsolutelysureitis
necessary.
7.10.1RestoringFactoryDefaults
1) SelecttheLD.DEFAULTSitemfromthemainmenu.(seebelowfordetails)
2)
PresstheSCROLL button.Notethattheconfirmationpromptusesaveryshorttimeout(approximatelythree
seconds)andassuchyouwillhavetoexecutethefollowingstepsrelativelyquickly.
3) PresstheUP orDOWNbuttontoselect “YES”.
4) PresstheSCROLL buttontoloadthedefaults. Thedisplaywilltemporarilyshow “DEFAULTSLOADED” to
confirmthatdefaultshavebeenloaded.
Notes
1) Afterthedefaultshavebeenloaded,ittakesapproximately10secondsforthecontrollertosavethem.Donot
turnoffthepowerbeforethisperiodelapses.
2) Theclockhour,minuteandweekdaywillnotberesetwhenyouloadthedefaults