INSTALLATION AND OPERATING INSTRUCTIONS CF Series ISO2858 Heavy Duty Industrial Centrifugal Pump Please pass these instructions on to the operator of this equipment.
Introduction Installation Location Thank you for purchasing a quality Davey product. It is our commitment to satisfy our customers by offering our very best service. It is important to select a site as close to the liquid source as possible. When a suction lift is unavoidable, install the pump as near to the water level as possible (see suction piping). You should always check the maximum permissible lift of the pump from its performance curve.
Starting Trouble Shooting Pump is running but failing to deliver water or desired pressure. Caution: Do not attempt to run pump if it has not been filled with water ( primed). Severe damage will result to shaft seal. 1) 2) 1) Ensure the suction line & pump casing is full of water open suction valve if fitted. 2) Check power is off & rotate the pump shaft slowly to release any trapped air within the pump casing. 3) Close the discharge valve.
Davey® Repair or Replacement Guarantee In the unlikely event in Australia or New Zealand that this Davey product develops any malfunction within one year of the date of original purchase due to faulty materials or manufacture, Davey will at our option repair or replace it for you free of charge, subject to the conditions below. Should you experience any difficulties with your Davey product, we suggest in the first instance that you contact the Davey Dealer from which you purchased the Davey product.
