User guide

7
CONNECTION TO THE SWITCH BOX
POSITIONING OF THE PRESSURE REGULATOR:
If your electrical equipment box is more than 5 metres away from the Jet Face, the Pressure
Regulator (interrupter of the pneumatic button) should be moved closer to the swimming pool in
a connection box.
WINTER STORAGE:
(Only required in countries with temperatures below 0
degrees Celcius)
-Disconnect the capillary tube from the switch box.
-Dismantle the Jet Face and remove the whole device.
-Place the two tapered stoppers in the two openings of the
Jet Body.
-Turn thumb screw until stopper has expanded adequately
to ensure seal is watertight