Owner's manual
2 11
Prior to using this pump you must ensure that:
• Thepumpisinstalledinasafeanddryenvironment
• Thepumpenclosurehasadequatedrainageintheeventofleakage
• Anytransportplugsareremoved
• Thepipe-workiscorrectlysealedandsupported
• Thepumpisprimedcorrectly
• Thepowersupplyiscorrectlyconnected
• Allstepshavebeentakenforsafeoperation
Appropriatedetailsforalloftheseitemsarecontainedinthefollowing
InstallationandOperatingInstructions.Readtheseintheirentiretybefore
switchingonthispump.IfyouareuncertainastoanyoftheseInstallation
andOperatingInstructionspleasecontactyourDaveydealerorthe
appropriateDaveyofceaslistedonthebackofthisdocument.
Congratulationsonyourpurchaseofahighquality,AustralianbuiltDavey
pressuresystem.Allcomponentshavebeendesignedandmanufactured
togivetroublefree,reliableoperation.
1. PressureTank(purchaseseperately)
2. PressureSwitch
3. DischargeOutlet
4. SuctionInlet
5. PumpBody
6. Motor
7. PressureGauge
8. PrimingPlug(pump)
9. Non-ReturnValve(notillustrated,
suppliedloose)
Pressure Tank
YourDaveyHMSeriesPressurePumprequirestheconnectionofaHydro
Pneumaticpressurevessel.Thiscanbeconnectedbyscrewingitdirectly
ontothetopofthedischargeoutletorcanbeconnectedviaahosetothe
sideofthedischargetee.
WerecommendtheDaveySupercellrangeoftanks.
Before installing your new pump, please read all instructions carefully as failures
caused by incorrect installation or operation are not covered by the guarantee. Your
Davey pressure system is designed to handle clean water. The system should not be
used for any other purpose without specic referral to Davey. The use of the system to
pump ammable, corrosive and other materials of a hazardous nature is specically
excluded.
NOTE: Prior to installation remove the red transport plugs from the suction and/or discharge.
5
4
8
7
2
3
1
6