User guide



The pump unit should be drained of water and normal engine storage procedure

should be followed. (Run unit until fuel is exhausted, drain and ll sump with fresh

oil.) The unit should be stored in a dry place. Before starting pump after storage it

should be checked to make sure that it is free to rotate by pulling Engine Starter

with ignition off.



Pump impeller is screwed clockwise onto the engine shaft. To remove the

impeller, unscrew locking setscrew or impeller/s anti-clockwise using a socket in

eye of impeller. If difcult to remove, lock engine crankshaft at recoil starter end.

NOTE: The pump body should always be full of water when







guarantee.

