Owner manual

63
42 0 - 200 LFO 1 Amount (over 100 repeats with Key sync on)
43 0 - 68 LFO 1 Destination (see destination table on page 67)
44 0 - 160 LFO 2 Frequency (same as LFO 1)
45 0 - 4 LFO 2 Shape (same as LFO 1)
46 0 - 200 LFO 2 Amount (over 100 repeats with Key sync on)
47 0 - 68 LFO 2 Destination (see destination table on page 67)
Parameter Range Description
48 0 - 198 Envelope 3 Amount; -99 to +99
49 0 - 68 Envelope 3 Destination (see destination table on page 67)
50 0 - 110 Envelope 3 Envelope Attack
51 0 - 110 Envelope 3 Envelope Decay
52 0 - 100 Envelope 3 Envelope Sustain
53 0 - 110 Envelope 3 Envelope Release
54 0 - 13 Trigger Select
0 All - The envelopes will be triggered by either the
sequencer or MIDI notes
1 Seq – The envelopes will be triggered by the sequencer
only.
2 MIDI – The envelopes will be triggered by MIDI notes
only.
3 MIDI Reset– Same, with sequencer reset on Note On
4 Combo - Envelopes will only be triggered with both a
MIDI note and the sequencer is running
5 Combo Reset – same, with sequencer reset on Note On
6 External Input gates the envelopes
7 External Input gates the envelopes and resets the
sequencer
8 External Input gates the sequencer
9 External Input gates the sequencer and resets the
sequencer
10 Midi note plays sequence once
11 Midi note plays sequence once, resetting on multiple
notes
12 External Trigger – the sequence plays once on an
external signal
13 MIDI trigger – the sequence plays once when a MIDI
note is received
55 0 - 73 Key Off / Transpose – 0 = MIDI notes ignored. 1 = -36
semitones MIDI transpose, 37 = no transposing, 73 = +36
semitones
Parameter Range Description
56 0 - 75 Sequencer 1 Destination (see destination table on page 67)
57 0 - 75 Sequencer 2 Destination (see destination table on page 67)
58 0 - 75 Sequencer 3 Destination (see destination table on page 67)
59 0 - 75 Sequencer 4 Destination (see destination table on page 67)
60 0 - 100 Noise Volume
61 0 - 100 External Input Volume
62 0 - 2 External Input Mode
0 Stereo