Owner manual
30 
Dest 1: see table  Mod 1 Destination - see the Modulation Destination table 
on page 34 for a list of possible destinations. 
Mods 2 – 4: Same as Mod 1 
Page 17: 
MIDI Modulation 
Velocity Amt: -99…+99 Amount of MIDI Velocity modulation. The 
Velocity of the most recent MIDI note is used. 
Vel Dest: see table  Velocity Destination - see the Modulation Destination 
table on page 34 for a list of possible destinations. 
Mod Whl Amt: -99…+99 Amount of MIDI Mod Wheel modulation. This 
parameter has a smoothing filter, which will clean up messy MIDI controller data into a 
clean response. If you want to bypass the filtering, use one of the four General 
Purpose Modulation sets, which are unfiltered. 
Mod Whl Dest: see table Mod Wheel Destination - see the Modulation 
Destination table on page 34 for a list of possible destinations. 
Pressure Amt: -99…+99 Amount of MIDI Pressure modulation, either 
poly or channel pressure. This parameter has a smoothing filter, which will clean up 
messy MIDI controller data into a clean response. If you want to bypass the filtering, 
use one of the four General Purpose Modulation sets, which are unfiltered. 
Press Dest:  see table  Pressure Destination - see the Modulation 
Destination table on page 34 for a list of possible destinations. 
Breath Am
t: -99…+99 Amount of MIDI Breath controller modulation. This 
parameter has a smoothing filter, which will clean up messy MIDI controller data into a 
clean response. If you want to bypass the filtering, use one of the four General 
Purpose Modulation sets, which are unfiltered. 
Breath Des: see table Breath controller Destination - see the Modulation 
Destination table on page 34 for a list of possible destinations. 
Foot Con Amt: -99…+99 Amount of MIDI Foot controller modulation. This 
parameter has a smoothing filter, which will clean up messy MIDI controller data into a 
clean response. If you want to bypass the filtering, use one of the four General 
Purpose Modulation sets, which are unfiltered. 
Foot Dest: see table Foot controller Destination - see the Modulation 
Destination table on page 34 for a list of possible destinations. 
Page 18: 
Misc Modulation 










