Owner manual

Basic Operation

Program Mode: When the Poly is first turned on, it will be in Program Mode with the

ROGRAM LED lit and the following screen active.

Program: xxx B:x

xxxxxxxxxxxxxxxx

The top line shows the Program (1…128) and Bank (1…4) number of the currently

selected Program, and the bottom line shows the 16 character name of the Program.

The top knob will change the Program, and the bottom knob will change the Bank.

The Program can also be incremented or decremented by using the P

AGE UP or PAGE

DOWN button respectively.

If you hold the S

HIFT button while changing the Program or Bank, the sound will not

change until you release the S

HIFT button. If you hold the SHIFT button while changing

the Program or Bank and the sequencer is running, when the S

HIFT button is released

the sequence will complete (according to the length of Sequence 1) before

synchronously changing to the new program and it’s sequence.

Edit Program Mode: To edit a Program, simply hit the E

DIT button while in Program

mode. See the Program Parameters section for a detailed list of all parameters and

their functionality.

Combo Mode: When the C

OMBO button is hit, it will switch to Combo Mode with the

following screen active.

Combo: xxx B:x

xxxxxxxxxxxxxxxx

The top line shows the Combo and Bank number of the currently selected Combo,

and the bottom line shows the 16 character name of the Combo. The top knob will

change the Combo, and the bottom knob will change the Bank. The Combo can also

be incremented or decremented by using the P

AGE UP or PAGE DOWN button

respectively.

Edit Combo Mode: To edit a Combo, simply hit the E

DIT button while in Program

mode. See the Combo Parameters section for a detailed list of all parameters and

their functionality.