Manual

ManualsBrandsDave Smith ManualsSynthesizersPOLY EVOLVER KEYBOARD

Fre

LFO ove

the (261 Hz, middle C).

ay not respond well to the fastest LFO

speeds, due to speed limitations of the control voltages; but they will certainly

gener ntere

Above 15 pe

quency: 0…150, sync – Sets the LFO frequency. Range 0–150 for unsynced

; speed ranges from slow (30 seconds) to very fast – at 90 (8 HZ, C-2) and ab

speed steps in semitones, up to 150

Note: Some of the analog functions m

ate some i sting sounds.

eds as follows: 0, the sync s

Display Timing Sync

32 Steps

Sequence speed divided by 32; i.e. one LFO cycle

takes 32 steps

16 Steps

Sequence speed divided by 16

8 Steps

Sequence speed divided by 8

4 Steps

Sequence speed divided by 4

2 Steps

Sequence speed divided by 2

1 Step

One cycle per step

1/2 Step

Two cycles per step

1/4 Step

Four cycles per step

1/8 Step

Eight cycles per step

1/16Step

Sixteen cycles per step

Shape: see tab ts the

le – Selec LFO waveshape:

Display LFO Shape

T riangle

Triangle

Rev Saw

Reverse Sawtooth

Sawtooth

Square

Square Wave

Random

Random – changes once per cycle for

sample-and-hold effects

Amount: 0…100 – Sets the amount of LFO routed to the destination.

ey Sync: When this sK

witch is enabled (lit) the Poly Evolver re-starts the LFO each

me a new note is played (Key Sync). Each LFO can be set independently.

estination: see table – see the Modulation Destination table on page 41 for a list of

ossible destinations.