Manual

17
An exception to the voice stealing rule is when Poly Chain is On. In this case rather
than stealing an already-used voice, the Poly will transmit the new note over MIDI so
it can be played by another linked Poly.
Individual Voice Outputs
The Poly has a pair of output jacks for each of the four voices on the back panel,
allowing separate mixing/processing of each voice. When a plug is inserted in the
jack, that signal is disconnected from the mix output.
Another trick is to route the output of one voice to the external audio inputs; then, in
Combo mode, you can use one (or more) voices to process a different voice. Or take
two different voice outputs (programmed in mono) and run one to the Left input and
one to the Right input for even wilder results.
Note: The individual outputs will normally be used in Combo mode only, where
you have complete control over the individual voices.