Manual

Parameter Range Description
48 0 – 198 Envelope 3 Amount; -99 to +99
49 0 – 68 Envelope 3 Destination (see destination table on page 53)
50 0 – 110 Envelope 3 Envelope Attack
51 0 – 110 Envelope 3 Envelope Decay
52 0 – 100 Envelope 3 Envelope Sustain
53 0 – 110 Envelope 3 Envelope Release
54 0 – 13 Trigger Select
0 All – The envelopes will be triggered by either the
sequencer or the keyboard
1 Seq – The envelopes will be triggered by the sequencer
only.
2 The envelopes will be triggered by the keyboard only.
3 Same, with sequencer reset on Note On
4 Combo – Envelopes will only be triggered by both the
keyboard and the sequencer is running
5 Combo Reset – same, with sequencer reset on Note On
6 External Input gates the envelopes
7 External Input gates the envelopes and resets the
sequencer
8 External Input gates the sequencer
9 External Input gates the sequencer and resets the
sequencer
10 Keyboard plays sequence once
11 Keyboard plays sequence once, resetting on multiple
notes
12 External Trigger – the sequence plays once on an
external signal
13 The sequence plays once when a key is hit
55 0 – 73 Key Off / Transpose – 0 = Key pitch ignored. 1 = -36
semitones keyboard transpose, 37 = no transposing, 73 =
+36 semitones
Parameter Range Description
56 0 – 75 Sequencer 1 Destination (see destination table on page 53)
57 0 – 75 Sequencer 2 Destination (see destination table on page 53)
58 0 – 75 Sequencer 3 Destination (see destination table on page 53)
59 0 – 75 Sequencer 4 Destination (see destination table on page 53)
60 0 – 100 Noise Volume
61 0 – 100 External Input Volume
62 0 – 2 External Input Mode
0 Stereo
1 Left Input channel goes to both channels
2 Right Input channel goes to both channels
3 Left channel audio, Right channel control
63 0 – 14 Input Hack Amount
Parameter Range Description
64 0 – 200 Glide, Oscillator 1; 101 – 199 = Fingered; 200 = osc midi off
65 0 – 1 Sync; 0 = off, 1 = on
66 30 –
250
Program tempo
50