User manual

Soundtower Tetra PlugSE V1.1 11
This area to the right is the master section for all four
sequencers. Click on the red LED to turn the sequencer on
and off, adjust Tempo, select SequencerTrigger source and
choose the ClockDivide option to determine the gate time
of each step relative to the tempo.
Additionally, by clicking on the DrawMode button, you
have the options for Sliders, Pen or Quantize. Choosing
Sliders allows the individual steps of the sequencer to be
raised and lowered to specic values. Selecting Pen allows
you to click and drag over the area of the screen indicating
the sequencer steps and the steps will jump to the level the
cursor was at as it passed over. Quantize is a secondary Slider mode that moves the steps in values of 2.
Clicking PROGRAM in the upper right corner will bring you back to the main editor page.
Clicking the Edit button in the in the left area of any of the four sequencers will open the window shown
below.
SEQUENCER EDITING
This enlarged view of the sequencer allows easier adjustment of the individual steps. The same controls
appear at the top of the window along with four small windows showing the current levels of each of the four
sequencers. Clicking on any of these areas will bring the values down the larger window for easy editing.
Select the sequencer you wish to adjust by clicking on the mini view of one of the four available.
Select the Tetra parameter you wish the sequencer to track in the SeqxDestination (x = 1, 2, 3 or 4). Set Clock
Divide and SequencerTrigger as required and click the red LED to engage the sequencer.