User guide

! Transmit Bank
The hierarchal menu drops down to give you the choice of Bank, A, B. C. D or
all all Banks. This transfers all the Banks from the software to the Tetra .
Load Program Bank to
The hierarchal menu drops down to give you the choice of Bank, A, B. C.
or D.
Once you select a bank, you well be presented with a dialog that allows
you to load a previously saved Bank from your computer.
Save Program Bank
The hierarchal menu drops down to give you the choice of Bank, A, B. C.
or D. Once you select a bank, you will be presented with a dialog that
allows you to save the selected bank you your computer.
Load Single Program
A dialog will appear that allow you to allow you to load a single program
you have previously saved to your computer. Loading this Program will
also load the Program into the Tetra edit buffer so you can hear the sound,
but it has not been saved. Select Write Program from the Program menu,
or click the Write button on the editor. You will be presented a dialog box
that allows you to select where the Program will be saved on the Tetra and
also to rename if you desire.
Save Single Program
A dialog will appear that will allow you to save the current program to your
computer.
Initialize
The hierarchal menu drops down to give you the choice of Bank, A, B. C.
or D.
Selecting one of these banks will initialize that bank. Note that this does not
initialize the Tetra, but rather just the bank in the Editor. I you desired to initialize the
bank in the Tetra, you would have to do this using the Transmit Bank described above.
Tetra SoundEditor User Guide Page 30