User guide

5. The Sequencer Window
The Tetra module contains a sequencer that can be programed in the SoundEditor. Basic controls
are found in the upper right block of the editor window.
To initiate the preprogrammed sequencer pattern associated with the Program or Combo you have
selected, click the Sequencer light in the top left hand corner of this block.
If you wish to show greater detail and to program specific sequencer patterns, click the Sequencer
button or by selecting “Sequencer” from the Edit menu. The Sequencer window is shown below.
This image shows the sequencer window in Program mode. Combo mode is similar. To return to
the editor control window, click on the image of the control window in the right hand middle third
of the sequencer, or click the Program button in the upper sequencer block.
Tetra SoundEditor User Guide Page 22