User Manual

59
Prophet X User’s Guide
Effects
Effects:
• Stereo Delay - classic digital delay
• BBD Delay - vintage bucket-brigade emulation
• Chorus - vintage chorus
• Flanger - vintage through-zero anger
• Phaser - vintage 6-stage phaser
• HP Filter - high-pass lter.
• Distortion - digital distortion (analog emulation)
• Rotating Speaker - vintage rotating speaker emulation
• Spring Reverb - classic spring reverb
• Room Reverb - classic room reverb
• Hall Reverb - classic hall reverb
• Super Plate Reverb - plate reverb
For best performance, run the angers and high-pass lter 100% wet. (i.e. set
the mix parameter to 127).
To use Effects:
1. Press the effect 1 button to turn on effect 1.
1. Press the select 1/2 button to select effect 1 for editing.
2. Turn the effect type knob to choose an effect.
3. Turn the mix knob to blend in a good amount of the processed signal.
You’ll want to be able to clearly hear the effect when you tweak its
settings. You can dial it down afterward.
4. Use the param 1, param 2, and param 3 knobs to adjust the effect’s
parameters to your taste. See “Effects Parameters” on page 60 for
details on the adjustable parameters on each effect type.
5. Finally, adjust the mix knob again to optimize the amount of the effect.
Full left is completely dry. Full right is completely wet (a 100%
processed signal).
6. To sync a delay to the arpeggiator or sequencer, press the sync button
and adjust the time parameter (Parameter 1) as needed.