User Manual

57
Prophet X User’s Guide
Modulation
To use the mod wheel to add vibrato:
1. In the lfo section, set LFO 1 to triangle and set frequency to 75. Set
destination to osc all freq. Set amount to 0. (You will control the
amount with the mod wheel.)
2. In the modulation section, press the assign source button. Use soft
knob 1 to scroll to Mod Slot 1 if it’s not already displayed.
3. Use soft knob 2 to scroll through the various mod sources and choose
mod wheel
4. Use soft knob 3 to set the amount to 30.
5. Use soft knob 4 to scroll through the various mod destinations and
choose lfo1 amt.
6. Hold down a note on the keyboard and turn the mod wheel. You should
hear vibrato.
Use pressure as the modulation source instead of the mod wheel in the previ-
ous example to add vibrato with key pressure/aftertouch.
To use the mod wheel to control the lter cutoff:
1. In the modulation section, press the source button. Use the soft knob 1
to scroll to Mod Slot 1 if it’s not already displayed.
2. Use the soft knob 2 to scroll through the various mod sources and
choose mod wheel.
3. Use soft knob 4 to scroll through the various mod destinations and
choose cutoff.
4. Hold down a note on the keyboard (or press the hold button and play a
note on the keyboard) and turn the mod wheel.
5. Use soft knob 3 to set the amount to your preference. Higher amount
settings cause the lter to open wider the further you push the mod
wheel. A negative amount setting will close the lter the further you
push the mod wheel.
Use pressure as the modulation source instead of the mod wheel in the previ-
ous example to open the lter (positive amount) or close the lter (negative amount)
with key pressure/aftertouch.