User Manual

56 Modulation Dave Smith Instruments
The Modulation section
Modulation Parameters (Front Panel)
Assign Source: Selects a modulation source. The are 28 different
modulation sources. See “Appendix A:
Modulation Sources” on page 130 for a complete list.
Assign Destination: Selects a modulation destination. The are 88 differ-
ent modulation destinations. See “Appendix B:
Modulation Destinations” on page 131 for a complete list.
Amount Sets the modulation amount. Modulation can be either positive
or negative.
Modulation Examples
Below are several modulation scenarios that illustrate how to use the modu-
lation matrix. The examples provide full, step-by-step instructions for clarity.
There are shortcuts for routing modulation to various front panel sources/
destinations. Simply hold down the
source button and move the control
you want to use as a source (the mod wheel, for example). Then hold
down the destination button and move the control that you want to use
as a destination (lter cutoff, for example). Set the amount using Soft
Knob 3 in the main display. Be aware that not all front-panel controls can
be used as a modulation sources/destinations.