User Manual

52 Low Frequency Oscillators Dave Smith Instruments
Additional LFO Parameters (Display Menus)
Additional LFO parameters are accessible through the menus in the main
display. To see these menus, adjust any of the controls in
lfo portion of the
front panel.
TAB 1 - LFO Shape
Triangle
Shape SyncFrequency Amount
LFO Control LFO Dest
Frequency
LFO Shape
640
AMOUNT
SYNC
Shape: Triangle, Sawtooth, Reverse Sawtooth, Square, Random—This
button sets the waveshape of the selected LFO.
Frequency: Sets the frequency of the selected LFO from a slow .022Hz
to a fast 500Hz. This is affected by the sync (clock sync) parameter as
explained below.
Sync: When on, the LFO synchronizes with the master clock, which
controls the arpeggiator, sequencer, and certain effects.
Amount: Sets the amount of LFO modulation routed to the selected
destination. Setting an amount here applies the selected modulation
continuously. You can also use the modulation matrix to route an LFO to
additional destinations and use a different modulation amount.