User Manual
49
Prophet X User’s Guide
Auxiliary Envelopes
TAB 2 - Env Amount
Amt:0
Attack DelayDecay Env Repeat
Vel On/O: On
Rept:O
Del:0
Env3 Dest LPF MiscEnv3 AmtEnv3 ADSR
Amount: 0...127—Sets the amount of modulation from the envelope to
the selected destination.
Velocity On/Off: On, Off—Allows key velocity to inuence how much
modulation is applied from the envelope to the selected destination. If
on, the harder you play, the more modulation will be applied. If off, key
velocity will not affect the modulation amount. This control allows for
more touch-sensitive application of modulation with the envelope.
Delay: 0...127—Sets a delay between the time the envelope is triggered
(note on) and when the attack portion actually begins.
Env Repeat: Off, On—When on, the Delay, Attack, and Decay segments
of the envelope repeat. Sustain still affects the level at which the Decay
segment ends, but instead of sustaining at a xed level while a note is
gated on, Delay, Attack, and Decay loop until the note is turned off. The
Release segment begins when the note is gated off, just as it does when
Repeat is off.
TAB 3 - Env Dest
Destination
Env3 DestEnv3 AmtEnv3 ADSR
DESTINATION
O
Destination: Various—Selects a modulation destination for the Auxiliary
Envelope. See “Appendix B: Modulation Destinations” on page 131 for a
list of possible destinations.