User Manual
45
Prophet X User’s Guide
Amplier Envelope
TAB 2 - VCA Env Amount
Amt:0
Attack DelayDecay Env Repeat
Vel On/O: On
Rept:O
Del:0
Vol/Pan LPF MiscVCA Env AmtVCA ADSR
Amount: 0...127—Sets the amount of modulation from the Amplier
Envelope to the VCA. In most cases you will probably want to set this
fully clockwise for maximum VCA volume. If you experience signal
clipping, try reducing the env amount.
Velocity On/Off: On, Off—Allows key velocity to inuence volume. If
on, the harder you play, the more the louder sound will be. If off, key
velocity will not affect the volume. This control allows for more touch-
sensitive sounds.
Delay: 0...127—Sets a delay between the time the envelope is triggered
(note on) and when the attack portion actually begins.
Env Repeat: Off, On—When on, the Delay, Attack, and Decay segments
of the envelope repeat. Sustain still affects the level at which the Decay
segment ends, but instead of sustaining at a xed level while a note is
gated on, Delay, Attack, and Decay loop until the note is turned off. The
Release segment begins when the note is gated off, just as it does when
Repeat is off.