User Manual

8 Chapter 1: Getting Started Dave Smith Instruments
To save a program to a different location:
1. Press the save/load button. Its LED begins blinking.
2. Turn the bank or program knobs (or Soft Knob 1 and Soft Knob 2) to
select a new location. You can only save to banks U1-U4.
3. Enter a name for the program using the appropriate Soft Knobs and
Soft Keys. (See the illustration that follows for their functions.)
4. Press the save/load button again. Its LED stops blinking and the
program is saved.
Saving a program saves any edits to programs on both Layer A and Layer B.
Revert
Writing to Bank:1 Program:1 A:
uper Strings
Hit ‘Write’ to Save Prog
Hit ‘Global’ to Exit
Write Bank Write Prog Select Char Edit Char
S
B:
Basic Program
Key AssignInsert CharCopy Name A>B Delete Char Select B
select bank
insert character delete character toggle to “B”
to edit the name
of Layer B
copy name
from layer A/B
select program select character edit character
Saving a Program
Canceling Save
Sometimes you may want to cancel saving a program before you
commit.
To cancel the save process before you commit:
• If the save/load button LED is ashing, press the global button. The
save/load LED stops ashing and saving is canceled. You can return to
editing if you want.