User Manual
7
Prophet X User’s Guide
Chapter 1: Getting Started
Creating a Program from Scratch
An existing program can be very useful as a jumping off point for new
sounds. But it’s also useful (and educational) to create a new sound from
scratch. The Prophet X makes this easy by providing a “basic preset”
that you can quickly recall at any time. This preset is very simple, with a
single oscillator as its basis.
To recall the basic program:
1. Press the global button.
2. Use soft knob 1 to select basic program in the display menu.
3. Press soft button 1 (write now). The current sound settings are reset to
the basic program.
4. Press the global button again to return to normal operation. From here
you can begin creating your own sound using the basic program as a
starting point.
You can also recall the Basic Program by simultaneously pressing the trans-
pose down and hold buttons.
Chapter 4 provides several sound design tutorials. It is designed to give you
a basic working knowledge of how to use the Prophet X to make your own
sounds. See “Chapter 3: Programming the Prophet X” on page 86.
Saving a Program
If you’ve created a sound that you like, you’ll probably want to save it.
Saving a program overwrites a previously saved program. Sound design-
ers often save many incremental versions of a program as they continue
to rene it. These intermediate versions often make good jumping off
points for new sounds.
To save a program to the same preset location:
1. Press the save/load button. Its LED begins blinking.
2. Enter a name for the program using the appropriate Soft Knobs and
Soft Keys. (See the illustration that follows for their functions.)
3. Press the save/load button again. Its LED stops blinking and the
program is saved.