User Manual

141
Prophet X User’s Guide
Appendix E: MIDI Implementation
MIDI Control: Off, On—When set to On, the synth will respond to MIDI
controllers, including pitch wheel, mod wheel, pedal, and volume.
MIDI Prog Enable: Off, On—When set to On, the synth will respond to
MIDI Program Change messages.
MIDI SysEx Cable: MIDI, USB—When set to MIDI it will receive and
transmit MIDI SysEx messages using the MIDI ports/cables When set to
USB it will receive and transmit MIDI SysEx messages using the USB
port/cable. MIDI SysEx messages are used when sending and receiving a
variety of data including, programs, alternative tunings, system updates,
and more.
MIDI Out Select: MIDI, USB, MIDI+USB—Sets the port by which MIDI
data will be transmitted.
MIDI Messages
System Real-Time Messages
Status Description
1111 1000 MIDI Timing Clock
Received Channel Messages
Status Second Third Description
1000 nnnn 0kkkkkkk 0vvvvvvv Note Off. Velocity is ignored
1001 nnnn 0kkkkkkk 0vvvvvvv Note On. Note off if vvvvvvv = 0
1010 nnnn 0kkkkkkk 0vvvvvvv Polyphonic Key Pressure
1011 nnnn 0vvvvvvv 0vvvvvvv Control Change; see “Received Controller Messages”
1100 nnnn 0ppppppp Program change, 0-127 for Programs 1-127 within
current Bank
1101 nnnn 0vvvvvvv Channel Pressure
1110 nnnn 0vvvvvvv 0vvvvvvv Pitch Bend LS Byte then MS Byte
Notes: 0kkkkkkk Note number 0-127
nnnn Channel number 0 to 15 (MIDI channel 1-16).
Ignored if MIDI channel set to ALL
0vvvvvvv Value